Witura WT9002 Manual do Utilizador descarregar pdf (Página 23)

WT-9002 IP65 User Manual

WT-9002 IP65 – USER MANUAL – Rev.2.0 – Technical Support: [email protected]

WITURA CORPORATION SDN BHD

It is possible to restore the deleted phone numbers of Guest List and this can be done by

sending the following SMS to the unit.

Simply sends a SMS Command *DARE#0 to the unit and it will restore the deleted

phone numbers. In the display screen of the unit, you should see as below.

Returned Message:

Recovery-OK

Note: Phone numbers can be recovered with certain condition which is the number has

been deleted with command *DEL># or *DELB# only. Certain phone number in the list

cannot be recovered with *DARE#0 if some new numbers were programmed after

issuing command *DEL># or *DELB#. All phone numbers cannot be recovered if were

permanently deleted with command *DARE#1.

The output relays are both set at factory default to latch for 1 second.

To activate the 2 output relays during a received call from the Call-Point you would use

the following prompts via the telephone hand-set.

Press *0# will activate relay 1 for 1 second at factory default.

Press *1# will activate relay 2 for 1 second at factory default.

Note: The latch time value can be changed via *EXT# command

In data recovery

Wait…

In data recovery

4.15 RELAY FUNCTION

4.14 RESTORE DELETED GUEST NUMBER

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 46 47

Sem comentários

Witura WT9002 Manual do Utilizador Página 23