Witura WT-9001 IP65 Manual do Utilizador descarregar pdf (Página 32)

WT-9001 IP65 GSM Remote Monitorin

& Remote Control S

stem

WT-9001 IP65 – USER MANUAL – Rev. 4.7 – Technical Support: [email protected]

WITURA CORPORATION SDN BHD

To reset the total counter value, you can send the following SMS message to the unit.

Text Command:

*CLA[N]#

N stands for Input number 5 – 8

Example:

When *CLA5# is applied, means the total increment counter value will be reset for

input 5

It is possible to sound the alarm manually by sending the following SMS command to the

unit, which remain active for the period of time set.

Text Command:

*ALNF#X

X stands for ON (1) or OFF (0) value

When *ALNF#1 is applied, means audible alarm will sound.

When *ALNF#0 (Default) is applied, means audible alarm will turn off.

To check siren status, you can send *ALNF?#

To check the signal strength (0-31), you would send the following SMS command to the

unit.

Text Command:

*CSQ?#

It is possible to check the system is operating correctly by sending the following SMS

command to the unit.

5.7.7 Reset the Total Increment Counter Value

5.7.9 Checking Signal Strength

5.7.10 Checking the System is Operating Correctly

5.7.8 Sound the Audible Alarm Manually

1 2 ... 27 28 29 30 31 32 33 34 35 36

Sem comentários

Witura WT-9001 IP65 Manual do Utilizador Página 32