Witura WT-9001 IP65 Manual do Utilizador descarregar pdf (Página 33)

WT-9001 IP65 GSM Remote Monitorin

& Remote Control S

stem

WT-9001 IP65 – USER MANUAL – Rev. 4.7 – Technical Support: [email protected]

WITURA CORPORATION SDN BHD

Text Command:

*TEST#

When the unit replies TEST-OK indicate the unit is operating correctly.

Note: If you receive no reply then unit is not working

To setup a password for reset command, you can send the following SMS command to

the unit.

Text Command:

*PAWO#XXXXXX

XXXXXX stands for 6 digits password: 123456 (Default)

Example:

To change the password to 654321, you would send the following SMS command to the

unit.

*PAWO#654321

To reset the unit, you can send the following SMS command to the unit.

Text Command:

*REST#XXXXXX

XXXXXX stands for 6 digits password based on *PAWO# (Default: 123456) and it

can be changed anytime.

To reset manually via hardware, just press the tact switch button.

To save parameters into the EEPROM, you can send the following SMS command to the

unit.

Text Command:

*SAVE2PROM#

5.7.11 Setting the Password for Reset Command

5.7.13 Saving Parameters

5.7.12 Reset the WT-9001

1 2 ... 28 29 30 31 32 33 34 35 36

Sem comentários

Witura WT-9001 IP65 Manual do Utilizador Página 33